Configuração Switch Mikrotik

Criar VLAN de Gerência

/interface vlan
add interface=bridge1 name=br1/4004_Gerencia-SW vlan-id=4004

Se tiver QINQ, a VLAN Master deve ser criada

/interface vlan
add interface=sfp1_fws01.dimce name=vlan1000-QINQ vlan-id=1000

Criar uma bridge com todas as portas do switch, e habilitar VLAN Filtering
Se existir uma porta QINQ, deve ser colocada a VLAN e não a porta na bridge

/interface bridge
add name=bridge1 vlan-filtering=yes

/interface bridge port
add bridge=bridge1 interface=ether6 pvid=4049
add bridge=bridge1 interface=ether8 multicast-router=disabled pvid=4057
add bridge=bridge1 interface=ether7 multicast-router=disabled
add bridge=bridge1 interface=ether1 multicast-router=disabled
add bridge=bridge1 interface=ether2 multicast-router=disabled
add bridge=bridge1 interface=ether9 multicast-router=disabled
add bridge=bridge1 interface=vlan1000-QINQ multicast-router=disabled
Quando tiver VLAN Access deve ser colocado o pvid da VLAN, se for TAG não precisa

Definir as portas das VLANs, e definir se são TAG ou Untagged/Access.

/interface bridge vlan
add bridge=bridge1 tagged=vlan1000-QINQ,bridge1 vlan-ids=4004
add bridge=bridge1 tagged=vlan1000-QINQ untagged=ether6 vlan-ids=4049
add bridge=bridge1 tagged=vlan1000-QINQ,ether7 vlan-ids=4050
add bridge=bridge1 tagged=vlan1000-QINQ,ether1 vlan-ids=4051,4052,4053,4054,4055,4056,4061
add bridge=bridge1 tagged=vlan1000-QINQ,ether2 vlan-ids=4059,4060
add bridge=bridge1 tagged=vlan1000-QINQ,ether9 vlan-ids=4058
add bridge=bridge1 tagged=vlan1000-QINQ untagged=ether8 vlan-ids=4057

Colocar IP de Gerência

/ip address
add address=172.16.64.18/30 interface=br1/4004_Gerencia-SW network=172.16.64.16
/ip route
add distance=254 gateway=172.16.64.17